\n\nCPU | \n\n\n- Support for 10th Generation Intel Core™ i9 processors/Intel Core™ i7 processors/Intel Core™ i5 processors/Intel Core™ i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1200 package up to 65W
\n- L3 cache varies with CPU
\n \n | \n
\n\nChipset | \n\n\n- Intel H410 Express Chipset
\n \n | \n
\n\nMemory | \n\n\n- 2 x DDR4 SO-DIMM socket supporting up to 32 GB of system memory
\n- Support for DDR4 2666/2933 MHz memory modules
\n \n | \n
\n\nOnboard Graphics | \n\n Integrated Graphics Processor-Intel HD Graphics support: \n\n- 1 x D-Sub port (Optional and share with one HDMI1.4 Port, Default support HDMI)
\n- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.0 version, HDCP 2.2, and HDR. \n- 2 x HDMI1.4a, supporting a maximum resolution of 4096 x 2160@30Hz
\n \nSupport for up to 2 displays at the same time Maximum shared memory of 1 GB \n | \n
\n\nAudio | \n\n\n- Realtek ALC887 codec
\n- High Definition Audio
\n- 2/4/5.1-channel
\n \n | \n
\n\nLAN | \n\n\n- 2 x Intel GbE LAN chips (10/100/1000 Mbit)
\n \n | \n
\n\nTPM | \n\n\n- Infineon chip, supporting TPM 2.0 (Optional)
\n \n | \n
\n\nExpansion Slots | \n\n\n- 1 x PCI Express x16 slot, running at x16 (PCIEX16)
(The PCIEX16 slot conforms to PCI Express 3.0 standard.) \n- 1 x M.2 Socket 1 connector for PCIe wireless module
\n- 1 x full size Mini PCIe connector (MSATA_PCIE)
The MSATA_PCIE slot shares bandwidth with the SATA3 2 connector. When an MSATA SSD is populated, the SATA3 2 connector becomes unavailable. The MSATA_PCIE connector can also be used as an MSATA connector. (The Mini PCI Express slot conforms to PCI Express 2.0 standard.) \n \n | \n
\n\nStorage Interface | \n\n Chipset: \n\n- 1 x M.2 connector on the top of the motherboard (Socket 3, M key, type 2280 SATA and PCIe x1 SSD support)
\n- 2 x SATA 6Gb/s connectors
\n \n | \n
\n\nUSB | \n\n Chipset: \n\n- 4 x USB 3.0/2.0 ports on the back panel
\n- 4 x USB 2.0/1.1 ports available through the internal USB headers
\n \n | \n
\n\nInternal I/O Connectors | \n\n\n- 1 x 4-pin ATX 12V power connector
\n- 1 x CPU fan header
\n- 1 x system fan header
\n- 1 x M.2 Socket 3 connector on the back of the motherboard
\n- 2 x SATA 6Gb/s connectors
\n- 1 x Mini PCIe/MSATA connector
\n- 1 x USIM connector on the back of the motherboard
\n- 1 x front panel header
\n- 1 x front panel audio header
\n- 1 x battery power cable connector
\n- 2 x USB 2.0/1.1 headers
\n- 4 x serial port power select jumpers
\n- 1 x AT/ATX mode switch jumper (AT_ATX)
\n- 4 x serial port
\n- 1 x SATA Power connector
\n- 1 x GPIO header
\n- 1 x LVDS header
\n- 1 x LVDS drive voltage jumper (LCD_VCC)
\n- 1 x flat panel display switch header (MON_SW)
\n- 1 x flat panel display header (FPD)
\n- 1 x speaker header (SPKR)
\n- 1 x buzzer header (SPEAKER)
\n- 1 x Clear CMOS jumper
\n- 1 x chassis intrusion header
\n- 1 x I2C header
\n- 1 x SMbus header
\n \n | \n
\n\n Back Panel Connectors | \n\n\n- 4 x USB 3.0/2.0 ports
\n- 2 x RJ-45 ports
\n- 1x HDMI2.0 port (Note)
\n- 2 x HDMI1.4a
\n- 2 x audio jacks
\n \n | \n
\n\n I/O Controller | \n\n\n- NuvoTon NCT6116D
\n \n | \n
\n\n H/W Monitoring | \n\n\n- Voltage detection
\n- Temperature detection
\n- Fan speed detection
\n- Overheating warning
\n- Fan fail warning
\n- Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install. \n \n | \n
\n\n BIOS | \n\n\n- 1 x 128 Mbit flash
\n- Use of licensed AMI UEFI BIOS
\n- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
\n \n | \n
\n\n unique Features | \n\n\n- Support for @BIOS
\n- Support for Q-Flash
\n \n | \n
\n\n Operating System | \n\n\n- Support for Windows 10 64-bit /Linux
\n \n | \n
\n\n Form Factor | \n\n\n- Thin Mini ITX Form Factor: 17.0 x 17.0 cm
\n \n | \n
\n\n Operating Temperature | \n\n\n- 0?°C to +60°C
\n \n | \n
\n\n
Recenze