\n\nCPU | \n\n\n- Support for 8th Generation Intel Core™ i7 processors/Intel Core™ i5 processors/Intel Core™ i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1151 package
\n- L3 cache varies with CPU
\n \n(Please refer \"CPU Support List\" for more information.) \n | \n
\n\nChipset | \n\n\n- Intel H310 Express Chipset
\n \n | \n
\n\nMemory | \n\n\n- 1 x DDR4 SO-DIMM sockets supporting up to 16 GB of system memory
\n- Support for DDR4 2400/2133 MHz memory modules
\n- Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
\n- Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
\n \n(Please refer \"Memory Support List\" for more information.) | \n
\n\nOnboard Graphics | \nIntegrated Graphics Processor-Intel HD Graphics support
\n\n- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
\n- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz
Support for HDMI 1.4 version and HDCP 2.2. \n \nMaximum shared memory of 1 GB \n | \n
\n\nExpansion Slots | \n\n\n- 1 x M.2 Socket 1 connector for an Intel CNVi wireless module only (CNVI)
\n \n | \n
\n\nStorage Interface | \nChipset: \n\n- 1 x M.2 connector (Socket 3, M key, type 2260/2280 SATA and PCIe x4/x2 SSD support) (M2A)
\n- 2 x SATA 6Gb/s connectors
\n \n | \n
\n\nUSB | \nChipset: \n\n- 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
\n- 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
\n \n | \n
\n\nAudio | \n\n\n- Realtek ALC887 codec
\n- High Definition Audio
\n- 2/4/5.1/7.1-channel
\n \n | \n
\n\nLAN | \n\n\n- Realtek GbE LAN chips (10/100/1000 Mbit)
\n \n | \n
\n\nTPM | \n\n\n- Infineon chip, supporting TPM 2.0
\n \n | \n
\n\nBack Panel Connectors | \n\n\n- 1 x DC-In power connector
\n- 2 x USB 2.0/1.1 ports
\n- 2 x USB 3.0/2.0 ports
\n- 1 x RJ-45 port
\n- 1 x HDMI port
\n- 1 x D-Sub port
\n- 2 x audio jacks
\n \n | \n
\n\nInternal I/O Connectors | \n\n\n- 1 x 4-pin ATX 12V power connector
\n- 1 x CPU fan header
\n- 1 x system fan header
\n- 2 x SATA 6Gb/s connectors
\n- 1 x SATA power connector
\n- 1 x front panel header
\n- 1 x front panel audio header
\n- 1 x battery power cable connector
\n- 1 x USB 3.0/2.0 header
\n- 1 x USB 2.0/1.1 header
\n- 2 x serial port headers
\n- 1 x LVDS header
\n- 1 x LVDS drive voltage jumper (LCD_VCC)
\n- 1 x flat panel display header (FPD)
\n- 1 x flat panel display power jumper (FPD_PWR)
\n- 1 x speaker header (SPKR)
\n- 1 x buzzer header (SPEAKER)
\n- 1 x Clear CMOS jumper
\n- 1 x chassis intrusion header
\n \n | \n
\n\nI/O Controller | \n\n\n- iTE I/O Controller Chip
\n \n | \n
\n\nH/W Monitoring | \n\n\n- Voltage detection
\n- Temperature detection
\n- Fan speed detection
\n- Overheating warning
\n- Fan fail warning
\n- Fan speed control
Whether the fan speed control function is supported will depend on the cooler you install. \n \n | \n
\n\nBIOS | \n\n\n- 1 x 128 Mbit flash
\n- Use of licensed AMI UEFI BIOS
\n- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
\n \n | \n
\n\nUnique Features | \n\n\n- Support for @BIOS
\n- Support for Q-Flash
\n \n | \n
\n\nBundle Software | \n\n\n- Norton Internet Security (OEM version)
\n \n | \n
\n\nOperating System | \n\n\n- Support for Windows 10 64-bit
\n \n | \n
\n\nForm Factor | \n\n\n- Thin Mini-ITX Form Factor; 17.0cm x 17.0cm
\n \n | \n
\n\n
Recenze